Development Boards

Our development boards are industry best products, perfect no matter your skill set. The super easy to use MicroPython programming language runs on all our boards, meaning you can get up and running as fast as possible.

Choose your networks!

WiPy 2.0

LoPy

SiPy

GPy

FiPy

WiPy 2.0

WiPy 2.0 is Pycom’s updated enterprise grade IOT development platform. The tiny MicroPython enabled WiFi & Bluetooth IoT development platform. With a 1KM WiFi range, state of the art Espressif ESP32 chipset and dual processor, the WiPy is all about taking the Internet of Things to the next level.

We’ve written an powerful and intuitive Python API to take advantage of every feature of the hardware. The learning curve is minimal. Simply put, Pycom boards are all about Python and the internet, but with rocket fuel.

LoPy

The LoPy is a compact triple network MicroPython enabled microcontroller (LoRa, Wifi, Bluetooth). It’s the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the LoPy offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast.

The LoPy can act as both a LoRa Nano Gateway and a multi-bearer (LoRa, WiFi and BLE) development platform.

SiPy

The SiPy is a triple bearer MicroPython enabled micro controller (Sigfox, Wifi, Blueooth)  – perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 chipset the SiPy offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast. Our module is CE, FCC, IC and RCM certified!

You can configure the SiPy in FSK mode to send packets directly from SiPy to SiPy. This way you can create the network configuration of your choice and then use another SiPy as central Nano-Gateway to forward the data to the cloud via WiFi.

GPy

Get on with a board that gets you into the newly available LTE-M networks. The GPy gives you full flexibility during testing, install, deployment and is delivered RCM, IC, CE and FCC certified.

With WiFi, BLE and cellular LTE CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. Create and connect your things everywhere, fast.

FiPy

Imagine 5 networks in one perfectly-formed, same-small-foot-print-as-WiPy- LoPy-and SiPy, IoT development board. MicroPython enabled. FiPy includes WiFi, Bluetooth, LoRa, Sigfox and dual LTE-M (CAT M1 and NBIoT) the FiPy gives access to all the world’s LPWAN networks on one tiny board.

Get on with a board that gives you full flexibility during testing, install, deployment and even later when you want to switch real-time your airtime network provider. You can switch when the time is right for you or set some parameters that will do so automatically.

Expansion Boards & Shields

Like what you see? If you’re planning on buying our development boards then you ought to get one of our expansion boards or shields to take your project to the next step, enabling loads of sensor abilities and further functionalities.

Our support services are second to none, with a vast array of self help material and the ability to contact us directly if you need to, helping to get you started with our development boards right away. We have each helped hundreds of people get things right and we are very friendly. Below is an overview of the ways we can help and some contact options.

Join us over on the Pycom Forum where there are loads more people who know a lot about MicroPython, our development boards and hacking in general. It’s a great network of Pyoneers.

The Pycom documentation covers everything you need to get started with any of our boards, plus lots of tutorials and FAQs.

Our downloads page has a range of specification sheets, firmware updates, pin-out diagrams and more.

Our Github page is a very active place with lots of information and repositories to get you going.

For those you are best off firing off an email to the support team. They almost always respond within an hour or so, so give it a go. Email support@pycom.io

If you’ve just acquired some of our products, visiting our Getting Started page might be your first port of call.

We work with a number of customers to design and develop their connected solutions. Either from scratch or putting it all together. Email us with your project and we’ll come straight back to you with a proposal. Email sales@pycom.io

We have a Tutorials Page with a range of subjects to get you started or provide inspiration for new projects.

The FAQs page is in the works, but still has some common questions and answers. If you have any questions you’d like to add please let us know and we can add them to the list!