The LoPy is a triple bearer MicroPython enabled microcontroller (LoRa, Wifi, Bluetooth) – perfect enterprise grade IoT platform for your connected Things. With the latest Espressif chipset the LoPy offers a perfect combination of power, friendliness and flexibility. Create and connect you things everywhere. Fast.

Need Help?

Our documentation and forums are a hive of information, tutorials and community. Don’t hesitate to jump on over and discover the breadth of information available.

At the same time, our pinout diagrams show you all pin level functionality in an easy to interpret manner.


– Powerful CPU, BLE and state of the art WiFi radio. 1KM Wifi Range
– Can also double up as Nano LoRa gateway
– MicroPython enabled
– Fits in a standard breadboard (with headers)
– Ultra-low power usage: a fraction compared to other connected micro controllers

NOTE: Using the LoRa radio without the external antenna can lead to damage of the device and is therefore not recommended.


– Espressif ESP32 chipset
– Dual processor + WiFi radio System on chip
– Network processor handles the WiFi connectivity and the IPv6 stack
– Main processor is entirely free to run the user application
– An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Operating Frequencies

– 868 MHz (Europe) at +14dBm maximum
– 915 MHz (North and South America, Australia and New Zealand) at +20dBm maximum

Range Specification

– Node range: Up to 40km
– Nano-gateway: Up to 22km
– Nano-gateway capacity: Up to 100 nodes


– 2 x UART, 2 x SPI, I2C, I2S, micro SD card
– Analog channels: 8×12 bit ADCs
– Timers: 4×16 bit with PWM and input capture
– DMA on all peripherals
– GPIO: Up to 24

Security & Certifications

– SSL/TLS support
– WPA Enterprise security
– CE 0700


– RAM: 512KB
– External flash: 4MB
– Hardware floating point acceleration
– Python multi-threading

Hash / encryption



802.1b/g/n 16mbps


Low energy and classic


Running at 32KHz


– Input: 3.3V – 5.5V
– 3v3 output capable of sourcing up to 400mA
– WiFi: 12mA in active mode, 5uA in standby
– LoRa: 15mA in active mode, 1-uA in standby

LoRa Specification

– Semtech LoRa transceiver SX1272
– LoRaWAN stack
– Class A and C devices


55mm x 20mm x 3.5mm (Without Headers)


– 7g
– 31g (Packaged)