Description
With LoRa, WiFi, BLE and cellular LTE–CAT M1/ NB1, the F01 H7 is Pycom’s latest and most powerful MuRata-based, MicroPython-programmable microcontroller OEM module. It’s the perfect enterprise grade IoT platform for flexible multi-network creations and rapid scaling of Things that connect to the Internet.
Availability: March 2023.
Number of units available: Limited
To discuss ordering please contact sales@pycom.io. Remember to specify F01 H7
High Level Features
IMPORTANT: These specifications may be subject to change without further notice.
- ARM® Cortex® M7 OEM module with Murata-based radio technology
- Easily SMT mounts onto standard carrier boards or M.2 boards
- Up to 37 usable MCU pins and 13 1SJ module pins accessed via a High-Density Connector
- Optional External WiFi/BLE antenna, RGB LED, Reset button and more on the M.2 carrier board
- Four Networks including WiFi, BLE, Cellular LTE–
- CAT M1/NB1, LoRa
- World ready as one product covers all LoRa(WAN) frequencies and LTE–M bands
- Powerful MCU 32bit ARM® Cortex® M7 with 280MHz frequency
- MicroPython and C/C++ programmable with Ultra–Low power usage: a fraction of other connected microcontrollers
- Size 40mm x 16mm x 2.7mm
Specifications
CPU
- Microcontroller STM32H7BQIY6QTR
- 32-bit ARM®Cortex ® -M7 core STM32H7 microcontroller, up to 599 DMIPS.
- Hardware floating point acceleration
- Python multi–threading
- 2 Mbyte onboard Flash memory
- 4 Mbytes of onboard RAM
- 46 com. and analogue interfaces,
- SMPS
- Crypto
Encryption
- Flagship NXP SE050C2HQ140nm NXP® IntegralSecurity architecture
- Common Criteria EAL 6+ certified up to OS level as a safe environment to run pre-installed NXP IoT applets, supporting full encrypted communications and secured lifecycle management
- RSA & ECC functionalities, high key length and future proof curves
- AES & 3DES encryption and decryption
- HMAC, CMAC, SHA-1, SHA-224/256/384/512 operations
- HKDF, MIFARE® KDF, PRF (TLS-PSK)
- Support of main TPM functionalities
- Secured flash user memory up to 50kB
- I2C Target (High-speed mode, 3.4 Mbit/s), I2C Controller (Fast-mode, 400 kbit/s)
- SCP03 (bus encryption and encrypted credential injection on applet and platform level)
- Contactless interface for late-stage parameter configuration of unpowered devices
- Standard (-25 to +85 °C) and extended temp range for industrial applications (-40 to +105 °C)
External Memory on fast Octo SPI interface
- 16 Mbytes of RAM
- 32 Mbytes of Flash
WiFi
- MuRata 1DX
- 11 b/g/n/e
- 11 n (2.4 GHz) up to 65 Mbps
- Network topology: AP and STA dual mode
- WLAN section supports SDIO v2.0
- Supported Features
- Modulation: DSSS/ CCK / ODFM
Bluetooth
- MuRata 1DX
- Low energy
- Bluetooth® v5.1 (BR/EDR/BLE) module
- Data Rate: 3Mbps PHY data rate
- Supports high-speed 4-wire UART interface
- PCM for audio data
LoRa
- MuRata 1SJ
- LoRaWAN stack – Class A, B & C Devices
- 860-930MHz LPWA Module
- Low power consumption
- Node range: Up to 8km
- Nano–gateway: Up to 8km
- Nano Gateway Capacity: up to 100 Nodes
LTE CAT–M1/NB–IoT
- MuRata 1SC specification
- One single chip for both CAT M1 and NB1
- LTE CAT M1 – 23 dBm
- 16 MB of flash
- 3GPP Rel. 13 eDRX and PSM modes
- Power Consumption: enables up to 10 year battery life
- Hibernation current: 1.5 μA (average)
- eDRX current: <45 uA (avg) @ 8 Hyperframes
- GNSS: GPS and Glonass
- VoLTE
RTC
– Running at 32KHz
Security
- NXP Secure Element
- SSL/TLS support
- WPA Enterprise security
Hash / Encryption
- SHA
- MD5
- DES
- AES
Certifications and Compliance
The F01 H7 is planned for the following compliance and certifications
- RED Directive
- ROHS
- CE
- FCC
- IC
- RCM
- PTCRB
As this is an OEM module with a certification using Pycom Antenna specifications it is likely to require further certification as it is manufactured into a finished product. Pycom can assist with the process.
Full Specification
Data Sheet Here