FiPy Multipack

82.70486.60

The FiPy Multipack Bundle features the FiPy, the only 5-network (WiFi, BLE, LoRa, Sigfox and LTE-M) and MicroPython combo micro controller on the market today the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the FiPy offers a perfect combination of power, friendliness and flexibility. Also included in the multipack is the LoRa/Sigfox Antenna and the LTE-M Antenna. Select which type of FiPy multipack you would like, selecting from either an Expansion Board, Pysense or Pytrack addition.

Create and connect your things everywhere. Fast.

Product photos are for illustration purposes only.

Clear

Description

The FiPy Multipack Bundle features the FiPy, the only 5-network (WiFi, BLE, LoRa, Sigfox and LTE-M) and MicroPython combo micro controller on the market today the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the FiPy offers a perfect combination of power, friendliness and flexibility. Also included in the multipack is the LoRa/Sigfox Antenna and the LTE-M Antenna, plus your selection of expansion board or sensor shield.

Create and connect your things everywhere. Fast.

Pytrack Features

  • Super accurate GNSS Glonass GPS
  • 3 axis 12-bit accelerometer
  • USB port with serial access
  • LiPo battery charger
  • MicroSD ard compatibility
  • Ultra low power operation (~1uA in deep sleep)

Pysense Features

  • Ambient light sensor
  • Barometric pressure sensor
  • Humidity sensor
  • 3 axis 12-bit accelerometer
  • Temperature sensor
  • USB port with serial access
  • LiPo battery charger
  • MicroSD card compatibility
  • Ultra low power operation (~1uA in deep sleep)

Expansion Board Features

  • USB and LiPo battery powered
  • FT234XD USB to serial converter
  • LiPo battery charger (BQ24040), with options for two different charging currents (100mA and 450mA)
  • TPS2115A with reverse voltage protection
  • MicroSD card slot
  • Three female headers to easily plug in the WiPy 2.0, LoPy, SiPy, FiPy or GPy.
  • JST style battery connector
  • Power LED and charge status LED
  • One user LED and one user switch
  • Battery voltage monitoring via the WiPy ADC
  • Lots of jumpers to enable/disable features

FiPy Features

  • Powerful CPu
  • Five networks: WiFi, BLE, cellular LTE-CAT M1/NB1, LoRa and Sigfox
  • 1KM WiFi range
  • MicroPython enabled
  • Fits in a standard breadboard (with headers)
  • Ultra-low power usage: a fraction compared to other connected microcontrollers

Processing

  • Espressif ESP32 SoC
  • Dual processor and WiFi radio system on chip
  • Networking processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Interfaces

  • 2 x UART, 2 x SPI, I2C, micro SD card
  • ANalog channels: 8_12 bit ADCs, 2_8 bit DAC
  • Timers: 2_64 bit with PWM with up to 16 channels
  • DMA on all peripherals
  • GPIO: Up to 22

Hash / Encryption

  • SHA, MD5, DES, AES

WiFi Networking

  • 802.11b/b/n 16mbps

Bluetooth

  • Low energy and classic

RTC

  • Running at 32KHz

Range

  • Node range: Up to 50km

Security & Certifications

  • SSL/TLS support up to 1.2
  • WPA Enterprise security
  • AES encryption engine

Memory

  • RAM: 4MB
  • Flash Memory: 8MB
  • GPIO: Up to 22
  • Hardware floating point acceleration
  • Python multi-threading

Power

  • Voltage Input: 3.3V 5.5V
  • 3v3 output capable of sourcing up to 400mA

Sigfox Operating Frequencies

  • RCZ1 – 868MHz(Europe)
  • RCZ2 – 902MHz (US, Canada and Mexico)
  • RCZ3 – (Japan and Korea)
  • RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)

Sigfox Specification

  • Semtech SX1272 – Long Range, Low Power RF Transceiver 860-1000MHz with LoRa® Technology
  • Class 0 device. Maximum Tx power:
    • 14dBm (Europe)
    • 22dBm (America)
    • 22dBm (Australia and New Zealand)
  • Node range: Up to 50km
  • Sigfox pre-certified (October 2016)
  • Power
    • Sigfox (Europe): 17mA in Rx mode, 47mA in Tx mode and 0.5uA in standb
    • Sigfox (Australia, New Zealand and South America):
    • 24mA in rX mode, 257 mA in Tx mode and 0.5uA in standby

Bluetooth Networking

  • Low energy and classic
  • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
  • Class-1, Class-2 and Class-3 transmitter without external power amplifer
  • Enhanced power control
  • 10dBm transmitting power
  • NZIF receiver with -98 dBm sensitivity
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO/SPI/UART
  • High speed UART HCI, up to 4 Mbps
  • BT 4.2 controller and host stack
  • Service Discover Protocol (SDP)
  • General Access Profile (GAP)
  • Security Manage Protocol (SMP)
  • Bluetooth Low Energy (BLE)
  • ATT/GATT
  • HID
  • All GATT-based profile supported
  • SPP-Like GATT-based profile
  • BLE Beacon
  • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
  • CVSD and SBC for audio codec
  • Bluetooth Piconet and Scatternet

LoRa Operating Frequencies

  • 868MHz(Europe) at 14dBm maximum
  • 915MHz (North and South America, Australia and New Zealand) at 20dBm maximum

LoRa Specification

  • Power consumption: 10mA Rx, 28mA Tx
  • LoRaWAN stack – Class A and C devices
  • Node range: Up to 40km
  • Nano-gateway: Up to 22km (Capacity up to 100 nodes)

Cellular Operating Frequencies

  • 34 bands supports from 699Mhz to 2690Mhz (Total world-wide support)
  • Cellular Specification
  • One single chip for both CAT M1 and NB1 (yes, only one chip)
  • 3GPP release 13 LTE Advanced Pro
  • Supports narrowband LTE UE categories M1/NB1
  • Integrated baseband, RF, RAM memory and power management
  • Reduced Tx power class option
  • Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
  • Data rates:
    • 300 kbps DL
    • 375 kbps UL (LTE Cat M1 in 1.4 Mhz, HD-FDD)
    • 40 kbps DL
    • 55 kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)

Tx/Rx Frequencies

Ports for LTE Bands
Tx frequencies
Rx frequencies
Low bands 5, 8, 12, 13, 18, 19, 20, 28
699 to 915 MHz
729 to 960 MHz
Mid bands 1, 2, 3, 4
1710 to 1980MHz
1805 to 2170 MHz

WiFi Networking

  • Up to 1km range
  • 802.11b/g/n 16mbps
  • Power: 12mA in active mode, 5uA in standby

Size

  • 55m x 20mm x 3.5mm (Without Headers)

Weight

  • 7g
  • 31g (Packaged)

Pytrack

Imagine a sensor shield which you can use with any of your Pycom multi-network modules! This is what we give you with Pysense and Pytrack a leg up to get you off to a great start really quickly.

Pytrack Features

  • Super accurate GNSS Glonass GPS
  • 3 axis 12-bit accelerometer
  • USB port with serial access
  • LiPo battery charger
  • MicroSD ard compatibility
  • Ultra low power operation (~1uA in deep sleep)

Location Services Supported

  • GPS
  • GLONASS
  • Galileo
  • QZSS

Use with Pybytes

Crafted by a group of Pycom back-end experts, the Pybytes platform will be everything there needs to be in place to gather, organise and display your data free of charge in the cloud. Regardless of whether you are a company, IoT system architect or an ambitious tech hobbyist we’ll soon have you connected.

Size

  • 55m x 35mm x 10mm

Weight

  • 11g (Standalone)

Cellular Antenna

External Cellular Antenna Kit covering both NB-IoT and Cat-M1 for use with the FiPy and GPy development boards.

Specification

  • Lte band 28/38*2
  • Frequency: 703~803/2520~2620(MHz)
  • Antenna size: 75 x 21 (mm)
  • PCB 0.6 mm

Low bands

  • (5, 8, 12, 13, 18, 19, 20, 28)
  • Tx frequencies 699 to 915 MHz
  • Rx frequencies 729 to 960 MHz

Mid bands

  • (1, 2, 3, 4)
  • Tx frequencies 1710 to 1980MHz
  • Rx frequencies 1805 to 2170 MHz

LoRa / Sigfox Antenna Kit

This universal LoRa & Sigfox Antenna Kit can be used with either the LoPy or the SiPy triple network IoT Development boards.

The LoRa & Sigfox Antenna Kit Includes:

  • External antenna.
  • RF Cable Assemblies RP-SMA (Female) JK-IPEX MHF U.FL 1.13 100MM
  • RP-SMA (Male) Tilt Swivel 1/2 Wave Whip antenna

 

NOTE: Using a LoRa or Sigfox radio on LoPy or SiPy without the external antenna can lead to damage of the device and is therefore not recommended. So, if it’s not this one, please make sure you get one somewhere else.

NOTE: For waterproofing please also order the special IP67 antenna connector cable.

Additional information

Weight N/A