LoPy4 Multipack

56.40359.00

The LoPy4 Multipack Bundle features the LoPy4, the only 4-network (WiFi, BLE, LoRa, and Sigfox) and MicroPython combination controller on the market today the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the LoPy4 offers a perfect combination of power, friendliness and flexibility. With this multipack you get to chose the number of LoPy4 (1, 2 or 5) you want as well as 1, 2 or 5 of the Expansion Boards, Pysense, Pytrack or Pyscan. Comes with appropriate antennas.

Create and connect you things everywhere. Fast.
Product photos are for illustration purposes only.

Clear
SKU: N/A Category: Tags: , , , , , , ,

Description

The LoPy4 Multipack Bundle features the LoPy4, the only 4-network (WiFi, BLE, LoRa, and Sigfox) and MicroPython combination controller on the market today the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the LoPy4 offers a perfect combination of power, friendliness and flexibility. Also included in the multipack is the LoRa/Sigfox Antenna and your selection of expansion board or sensor shield. This Multipack allows you to get 1, 2 or 5 of LoPy4 and 1, 2 or 5 each of either Expansion Board, Pysense, Pytrack or Pyscan.

Create and connect your things everywhere. Fast.

Pyscan Features

  • 3 axis 12-bit accelerometer
  • Ambient light sensor
  • RFID-NFC Chip
  • USB port with serial access
  • LiPo battery charger
  • MicroSD card compatibility
  • Ultra low power operation (~1uA in deep sleep)
  • NFC / RFID Antenna included

Pytrack Features

  • Super accurate GNSS Glonass GPS
  • 3 axis 12-bit accelerometer
  • USB port with serial access
  • LiPo battery charger
  • MicroSD ard compatibility
  • Ultra low power operation (~1uA in deep sleep)

Pysense Features

  • Ambient light sensor
  • Barometric pressure sensor
  • Humidity sensor
  • 3 axis 12-bit accelerometer
  • Temperature sensor
  • USB port with serial access
  • LiPo battery charger
  • MicroSD card compatibility
  • Ultra low power operation (~1uA in deep sleep)

Expansion Board Features

  • USB and LiPo battery powered
  • FT234XD USB to serial converter
  • LiPo battery charger (BQ24040), with options for two different charging currents (100mA and 450mA)
  • TPS2115A with reverse voltage protection
  • MicroSD card slot
  • Three female headers to easily plug in the WiPy 2.0, LoPy, SiPy, FiPy or GPy.
  • JST style battery connector
  • Power LED and charge status LED
  • One user LED and one user switch
  • Battery voltage monitoring via the WiPy ADC
  • Lots of jumpers to enable/disable feature

 

LoPy4 Features

  • Powerful CPU, BLE and state of the art WiFi radio
  • Can also double up as Nano LoRa gateway
  • MicroPython enabled
  • Fits in a standard breadboard (with headers)
  • Ultra-low power usage: a fraction compared to other connected micro controllers

Processing

  • Espressif ESP32 chipset
  • Dual processor WiFi radio System on chip
  • Network processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Sigfox Operating Frequencies

  • RCZ1 ? 868MHz (Europe)
  • RCZ2 ? 902MHz (US, Canada and Mexico)
  • RCZ3 ? (Japan and Korea)
  • RCZ4 ? 920-922MHz (ANZ, Latin America and S-E Asia)

Sigfox Specification

  • Class 0 device. Maximum Tx power:
  • 14dBm (Europe)
  • 20dBm (America)
  • 20dBm (Australia and New Zealand)
  • Node range: Up to 50km
  • Sigfox certified

LoRa Specification

  • Semtech LoRa transceiver SX1272
  • LoRaWAN stack
  • Class A and C devices

LoRa Operating Frequencies

  • 868 MHz (Europe) at 14dBm maximum
  • 915 MHz (North and South America, Australia and New Zealand) at 20dBm maximum
  • 433 MHz (Europe) at 10dBm maximum
  • 470 – 510 MHz (China) at 14dBm maximum

Range Specification

  • Node range: Up to 40km
  • Nano-gateway: Up to 22km
  • Nano-gateway capacity: Up to 100 nodes

Interfaces

  • 2 x UART, 2 x SPI, I2C, I2S, micro SD card
  • Analog channels: 8_12 bit ADCs
  • Timers: 4_16 bit with PWM and input capture
  • DMA on all peripherals
  • GPIO: Up to 24

Security & Certifications

  • SSL/TLS support
  • WPA Enterprise security
  • FCC 2AJMTLOPY4R
  • CE 0700

Memory

  • RAM: 4MB
  • External flash: 8MB
  • Hardware floating point acceleration
  • Python multi-threading

Hash / encryption

  • SHA, MD5, DES, AES

WiFi

  • 802.1b/g/n 16mbps

Bluetooth

  • Low energy and classic

RTC

  • Running at 32KHz

Power

  • Input: 3.3V ? 5.5V
  • 3v3 output capable of sourcing up to 400mA
  • WiFi: 12mA in active mode, 5uA in standby
  • LoRa: 15mA in active mode, 1-uA in standby
  • Sigfox (Europe): 17mA in Rx mode, 47mA in Tx mode and 0.5uA in standby
  • Sigfox (Australia, New Zealand and South America): 24mA in Rx mode, 257 mA in Tx mode and 0.5uA in standby

Size

  • 55mm x 20mm x 3.5mm (Without Headers)

Weight

  • 7g
  • 31g (Packaged)

LoRa / Sigfox Antenna Kit

  • External antenna.
  • RF Cable Assemblies RP-SMA (Female) JK-IPEX MHF U.FL 1.13 100MM
  • RP-SMA (Male) Tilt Swivel 1/2 Wave Whip antenna
  • Weight: 21g

 

Compatible with Pymakr plugins.

The LoPy4 includes 1-year of Sigfox connectivity.
NOTE: Using the LoRa or Sigfox radio without the external antenna can lead to damage of the device and is therefore not recommended.

PLEASE NOTE: Pycom modules are powered by the NEW and FEATURE PACKED Espressif ESP32 chip. As a result our firmware is evolving constantly as the ESP32 IDF matures. Regular firmware updates are therefore provided.

If you are purchasing the LoPy4 and wish to connect via USB to your computer, you will also need to purchase either the Expansion Board 2.0, Pysense or Pytrack.

Additional information

Weight N/A