PyGo1 includes charging cradle

78.95

Non-cellular multi-purpose wearable device featuring Pymesh and the following…

  • LoRa, WiFi and Bluetooth
  • OLED
  • GPS
  • Accelerometer
  • State of the art antennas
  • LiPo battery
  • 6 exposed pins (2 charging/4 universal in/out)

In stock

Description

NOW AVAILABLE FOR SHIPPING WITH CHARGING CRADLE

Meet the PyGo1 which is in essence a LoPy4 module on steroids! We packed the LoPy4 in an IP6X case, gave it an OLED, a GPS, an accelerometer, some state of the art antennas, and a LiPo battery. The PyGo1 features six exposed pins: 2 for power and 4 universal inputs/outputs with digital/analogue capabilities so that you can connect different types of sensors and actuators. Developers can physically connect Things and sensors to a PyGo!

Best of all, the PyGo are usable with the Pylife Mobile App for Android and iOS and can link up with other Pycom modules. We launched the PyGo modules with the ability to mesh together at distance of up to 12KM. PyGo1 includes WiFi, Bluetooth, and LoRa.

If you are purchasing the PyGo1 and wish to connect via USB to your computer, you will also need to purchase the PyGo cradle.

 

PyGo1 Features

  • Powerful CPU
  • Five networks: WiFi, BLE, LoRa, and LoRa (MESH)
  • Up to 1KM WiFi range
  • Electrical circuit protection
  • Ultra-low power usage: a fraction compared to other connected microcontrollers
  • Pymakr IDE supported
  • Pylife Application with IFTTT style environment for light programming
  • OLED
  • IP6X rated

 

Processing

  • Espressif ESP32 SoC
  • Dual processor and WiFi radio system on chip
  • Networking processor handles the WiFi connectivity and the IPv6 stack
  • Main processor is entirely free to run the user application
  • An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

 

Interfaces

  • Analog channels: 8_12 bit ADCs, 2_8 bit DAC
  • Timers: 2_64 bit with PWM with up to 16 channels
  • DMA on all peripherals
  • 2 Pins (Power)
  • GPIO: 4 analog input (0-3.3V 12bit SAR ADC) and digital (3.3V logic) input/output pins.

 

Hash / Encryption

  • SHA, MD5, DES, AES

 

WiFi Networking

  • 802.11b/b/n 16mbps

 

Bluetooth

  • Low energy and classic

 

RTC

  • Running at 32KHz

 

Range

  • Node range: Up to 50km

 

Security & Certifications

  • SSL/TLS support up to 1.2
  • WPA Enterprise security
  • AES encryption engine

 

Memory

  • RAM: 64Mbit
  • Flash Memory: 8MB
  • Hardware floating point acceleration
  • Python multi-threading

 

Power

  • LiPo battery: 420mAh LiPo 4.2V

 

Pymesh

  • Connect upto 200 devices in a mesh using our LoRamesh technology

 

Sigfox Operating Frequencies

  • RCZ1 – 868MHz(Europe)
  • RCZ2 – 902MHz (US, Canada and Mexico)
  • RCZ3 – (Japan and Korea)
  • RCZ4 – 920-922MHz (ANZ, Latin America and S-E Asia)

 

Sigfox Specification

(Hardware capable but no longer supported)

    • Semtech SX1272 – Long Range, Low Power RF Transceiver 860-1000MHz with LoRa® Technology
    • Class 0 device. Maximum Tx power:
    • – 14dBm (Europe)
    • – 22dBm (America)
    • – 22dBm (Australia and New Zealand)
      • Node range: Up to 50km
      • Sigfox pre-certified (October 2016)
      • Power
  • Sigfox (Europe): 17mA in Rx mode, 47mA in Tx mode and 0.5uA in standby
  • Sigfox (Australia, New Zealand and South America):
  • 24mA in rX mode, 257 mA in Tx mode and 0.5uA in standby

 

Bluetooth Networking

  • Low energy and classic
  • Compliant with Bluetooth v4.2 BR/EDR and BLE specification
  • Class-1, Class-2 and Class-3 transmitter without external power amplifer
  • Enhanced power control
  • 10dBm transmitting power
  • NZIF receiver with -98 dBm sensitivity
  • Adaptive Frequency Hopping (AFH)
  • Standard HCI based on SDIO/SPI/UART
  • High speed UART HCI, up to 4 Mbps
  • BT 4.2 controller and host stack
  • Service Discover Protocol (SDP)
  • General Access Profile (GAP)
  • Security Manage Protocol (SMP)
  • Bluetooth Low Energy (BLE)
  • ATT/GATT
  • HID
  • All GATT-based profile supported
  • SPP-Like GATT-based profile
  • BLE Beacon
  • A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
  • CVSD and SBC for audio codec
  • Bluetooth Piconet and Scatternet

 

LoRa Operating Frequencies

  • 868MHz(Europe) at 14dBm maximum
  • 915MHz (North and South America, Australia and New Zealand) at 20dBm maximum

LoRa Specification

  • Power consumption: 10mA Rx, 28mA Tx
  • LoRaWAN stack – Class A and C devices
  • Node range: Up to 40km
  • Nano-gateway: Up to 12km (Capacity up to 200 nodes)
  • Auto-connect to the ThingsNetwork

WiFi Networking

      • Up to 1km range
      • 802.11b/g/n 16mbps
      • Power: 12mA in active mode, 5uA in standby

Size

      • 41 x 20 x 22.5 (mm)

Weight

    • 24g
    • 54g (Packaged)

Additional information

Weight 0.024 kg
Dimensions 4.1 × 2.4 × 1.25 cm
Weight

24 g

Dimensions

41 x 24 x 12.5 (mm)

You may also like…