Get ready to wirelessly monitor air temperature and humidity wherever you are.
Ready to use out of the box, the Pynode+ AIR is a Bluetooth BLE enabled sensor that connects seamlessly to your WiPy, GPy, LoPy4, FiPy or OEM module. Or you could even connect it to something that’s not a Pycom device as long as it runs BLE 5.1.
Pynode+ sensors are ready to use out of the box.
The kit contains the Pynode+ Air sensor and a coin cell battery.
Pynode+ Air Specifications
Temperature and Humidity Sensor
Sensirion SHTC3 Temperature & Humidity sensor
Bluetooth / BLE
BLE Chip: Dialog Semiconductor DA14531
Compatible with Bluetooth v5.1, ETSI EN 300, 328 and EN 300 440 Class 2 (Europe), FCC CFR47 Part 15 (US) and ARIB STD-T66 (Japan)
Supports up to three BLE connections
Microcontroller: 16 MHz 32-bit Arm® Cortex-M0+
TX: 3.5 mA, RX: 2.2 mA (system currents with DC-DC, VBAT_HIGH =3 V and 0 dBm)
Pynode+ Air Size
Weight: 3g (excl. battery) and 6g (incl. battery)
Weight in packaging: 21g
Panasonic CR2032 LITHIUM 3V COIN 20mm
Central role for initial configuration: avg.: 446uA and max: 1.67mA
Peripheral and Advertising mode (1minute sleep timer): avg.: 220uA and max: 17.10mA (Gas sensor enabled)
Check out the docs for more information about the Pynodes:
Other Pynode+ Products
Pynode+ AirQ – available now
Pynode+ Motion, the Pynode+ AR and the Pynode+ Health – coming soon.
New Pynode+ Cases
Don’t forget to check back in early October 2021. We have some neat new Pynode Sensor cases coming. You can then add your Pynode+ to the case and combine more Pynodes+ to form a neat cluster of BLE sensors.