Description
The WiPy multipack bundle contains the following options: 1, 2 or 5 WiPy modules (our double-network, WiFi and BLE, development board). It also includes 1, 2 or 5 of our latest Expansion Board, Pytrack 2.0 X, Pysense 2.0 X or Pyscan sensor shields and an external WiFi antenna.
WiPy Features
- Powerful CPU, BLE and state of the art WiFi radio
- 1KM WiFi range
- MicroPython enabled, the Linux of IoT for fast deployment
- Fits in a standard breadboard (with headers)
- Ultra-low power usage: a fraction compared to other connected microcontrollers
- Hardware floating point acceleration
- Python multi-threading
- Weight: 5g
Pyscan Features
- 3 axis 12-bit accelerometer
- Ambient light sensor
- RFID-NFC Chip
- USB port with serial access
- LiPo battery charger
- MicroSD card compatibility
- Ultra low power operation (~1uA in deep sleep)
- NFC / RFID Antenna included
Pytrack 2.0 X Features
- Super accurate GNSS Glonass GPS
- 3 axis 12-bit accelerometer
- USB port with serial access
- LiPo battery charger
- MicroSD ard compatibility
- Ultra low power operation (~1uA in deep sleep)
- NEW – External 6 pin connector to add new Pycom sensor range Pynodes. You can technically have upto 256 nodes connected in a daisy chain (data bus) although we are sure you would never reach that number
- NEW – SMA connector for External active / passive GPS antennas when the built-in GPS antenna needs a boost!
- NEW – circuity to enable full power down of module for hard resets without needing to put module in Deep sleep
- NEW – safeboot button for when things go wrong
Pysense 2.0 X Features
- Ambient light sensor
- Barometric pressure sensor
- Humidity sensor
- 3 axis 12-bit accelerometer
- Temperature sensor
- USB port with serial access
- LiPo battery charger
- MicroSD card compatibility
- Ultra low power operation (~1uA in deep sleep)
- NEW – External 6 pin connector to add new Pycom sensor range Pynodes. You can technically have upto 256 nodes connected in a daisy chain (data bus) although we are sure you would never reach that number
- NEW – circuity to enable full power down of module for hard resets without needing to put module in Deep sleep
- NEW – safeboot button for when things go wrong
Expansion Board Features
- USB and LiPo battery powered
- FT234XD USB to serial converter
- LiPo battery charger (BQ24040), with options for two different charging currents (100mA and 450mA)
- TPS2115A with reverse voltage protection
- MicroSD card slot
- Three female headers to easily plug in the WiPy, LoPy, SiPy, FiPy or GPy.
- JST style battery connector
- Power LED and charge status LED
- One user LED and one user switch
- Battery voltage monitoring via the WiPy ADC
- Lots of jumpers to enable/disable feature
PLEASE NOTE: The Espressif ESP32 firmware on Pycom modules is continuously evolving and buyers are reminded that regular firmware updates will be made available.